Yuyao Gongyi Meter Co., Ltd.
Main products:Temperature Controller,Humidity Controller,Timer,Temperature Sensor
Contact Us
  • Contact Person : Ms. Mo Ariel
  • Company Name : Yuyao Gongyi Meter Co., Ltd.
  • Tel : 86-574-62833903
  • Fax : 86-574-62814210
  • Address : Zhejiang,Yuyao,Area B, Industrial Development Zone
  • Country/Region : China
  • Zip : 315400


Product Detailed
Related Categories:Timers
Related Product Searches:timer,High Quality,timer, time relay,JSS48-10
digital timer adopt CPU 3-LED display Size: 48*48*90mm; hole size: 44*44mm control range 1-999HMS; power AC110-220V

      Digital Timer adopt CPU and 3-LED display ,it applies special technique to resist interference in order to prolong the connection with the electricity,the relay has set by hour ,minute and second, it has advantage of accuracy ,long lifetime and low consumption,steady and reliable quality.It can be used under all kinds of occasion as metallurgy,electronic,machinery,textile,plastic,medical treatment,electric oven and toast oven,i.e.

Performance Indexes

1..Display method3-LED display directly the time

2..clock accuracy:class 0.005%F.S

3..Control range1 ~999 S

4..Working power AC110~220 V

5. exterior48×48×90  hole size44×44

6. Power consumption3W

7. Output contact capacityAC220V  3Aresistance load

8. Working circumstancetemperature050,humidity85%RH without corrosive gas occasion.


To install the instrument just open an installation hole on the installation screen of the machine according to the specified size, after which insert the instrument into the hole, fasten the installation screen with the attached installation frame.

Connection Scheme

Application method

After the instrument is wired,set the switch at the required setting value of the time, then turn the power on, the instrument will start timing from 0,the instrument will stop timing until the setting time,and the contact of the instrument contact jaw will be connected at “General Low”. If change the setting time in the midway, so it should cut the power off first then turn on ,start timing till the new setting time ,otherwise it will stop timing during the first setting time.


Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.